Service Line Base D Elevator for Wheeled Loads
The ideal solution for transporting wheeled products or larger boxes and crates. The BASE D service lift features robust hinged doors and can carry a wide variety of items. At the same time, it is just as flexible and adaptable as all our service lifts. This solution allows for the transport of medium-sized goods up to 300 kg, with minimal pit depth.
Share it!
Technical Specifications
Key Data:
- Rated load: 100 – 300 kg
- Accessible sides: Up to 3
- With hinged doors at floor level
- Motor arrangement: At the top or side of the shaft
- Rated speed: Up to 0.3 m/s
- With safety gears (holding system) for accessible spaces under the shaft
Standard Equipment:
- Cabin and landing doors: Made of Zintec steel for customized painting
- Shaft structure: Made of hot-dip galvanized steel for installation in an on-site shaft
- Short assembly times: Due to pre-assembled components
- Motor: With compact worm gear
- Microprocessor control: Fully pre-wired and with plugs, in 24-volt technology
- Call and send control
- Call confirmation, arrival signal, and position indicator
- Diagnostic system
Optional:
- Stops: Up to 30
- Head: Up to 120 m
- Rated speed: Up to 1.0 m/s
- Fire-rated doors: According to EN 81-58
- Car closure or load restraint
- Frequency control
- Interfloor heating
- Cabin and shaft lighting: LED
- Overload protection
- Materials and surfaces: According to customer requirements
- Special functions and displays
- Intercom systems
- Water/dust protection (IP)
- Special solutions for reduced shaft conditions
- Special cabin dimensions
Cabin Dimensions:
- Width: 450 – 1000 mm
- Depth: 600 – 1000 mm
- Height: 800 – 1200 mm
